2025 New Holland Discbine® 209 Flail

2025 New Holland Discbine® 209 Flail

Swipe to View More

  • Year 2025
  • Make New Holland
  • Model Discbine®
2025 New Holland Discbine® 209 Flail

2025 New Holland Discbine® 209 Flail

2025 New Holland Discbine® 209 Flail

Discbine® Side-Pull Disc Mower-Conditioners

FAST, SMOOTH CUTTING

The maneuverable 9’2” (2.8 m) Discbine® 209 and the 10’4” (3.16 m) Discbine® 210 make high-quality hay with the smooth, trouble-free performance you expect from a genuine Discbine®.

CUT WITH EVEN MORE CONFIDENCE

For ultimate peace of mind, a 2-year base warranty is standard along with an additional year of the MowMax™ cutterbar warranty so you can cut with even more confidence.

STANDARD QUICKMAX™ KNIFE CHANGE SYSTEM

The QuickMax knife change system makes it easy to keep knives sharp for the close, clean cut you want and increased tonnage.

HIGH QUALITY AND FAST DRYDOWN

Choose the best conditioning system for your crops – rubber chevron rolls, steel chevron rolls or LeaningEdge™ flail tines.

QUALITY AND SPEED IN A 9’2” AND 10’4” MACHINE

The new Discbine® 209 and Discbine® 210 disc mower-conditioners help you make the very highest-quality hay, and help you keep more of it. They cut crop closely, cleanly and quickly, and condition it uniformly for faster drydown, preserving nutrients.

Features may include:

MOW FAST AND DRY FAST - BALE SOONER

When the weather forecast is just right, it’s time to mow. Often the perfect haymaking window threatens to close without warning. You can’t control the weather but you can choose the tools that help you work quickly. Discbine® models with the MowMax™ disc cutterbar offer fast mowing and smooth uniform crop flow to the conditioner that can help open your haymaking window.

SAVE TIME AND MOW BETTER WITH THE QUICKMAX™ KNIFE CHANGE SYSTEM

When you use sharp knives, you get a smooth finish, add tons to your harvest and improve the cut quality of future cuttings. With the QuickMax system, a special knife tool allows you to change bent or dull knives in less time than getting out of the tractor, so you save time and crop.

FAST CROP DRYING WITH THREE FLEXIBLE, WIDEDRY™ CONDITIONING CHOICES.

Whether you’re mowing alfalfa, clover, orchard grass, timothy, bermuda grass, bahia, grass, fescue, cereal rye, forage wheat or oats, the Discbine® 209 and 210 cut quickly and produce nutritious, high-value feed using your choice of conditioning systems. Both mowers give you the choice of gentle, effective conditioning with rubber chevron-intermeshing or LeaningEdge™ flail tines for fast grass hay drying. The Discbine® 210 offers the added choice of steel chevron-intermeshing rolls. No matter the system, each offers fast, infinite adjustments to conditioning intensity to match crop and weather conditions.

GET MOWING FAST

New Holland’s standard Discbine® 209 and 210 hitches attach fast with a traditional hitch pin, PTO shaft, a lighting plug, and always just two remotes. No complicated hitch extensions here. When the sun shines it’s time to make hay, so hook up and get to mowing.

PTO

PTO Power, Rated Engine Speed Minimum required: 65 hp (49 kW)

Drivetrain

Drive System Cutterbar - Method: PTO drive with slip & overrunning clutch to bevel gearbox to LH end of header, vertical PTO shaft to cutterbar | LeaningEdge Flail Conditioner - Method: 4 HB v-belt
Driveline Input speed: 540 rpm | Protection: Slip clutch and overrunning clutch assembly at rear of PTO shaft | Secondary: Non-CV driveline

Wheels & Tires

Tires, Rear Specification Tubeless ag rib implement: 9.5L x 14L 6PR

Electric

Electrical 7-pin electrical connector for transport lights

Operational

Operating Speed Disc speed @ 540 rpm PTO: 3000 rpm | LeaningEdge Flail Conditioner: 718 std | Max road speed: 20 mph (32 kph)

Hydraulics

Hydraulic Type Circuits required: 2
Minimum Hydraulic Pressure Relief pressure required: 1500 psi (103 bar)

Chassis

Hitch/Type Drawbar with CV PTO | ASAE Category II

Dimensions

Cutting Width 9’ 2” (2.8 m)
Height Cutting: 1.1-2.7 in (29-68 mm)
Length LeaningEdge Flail Conditioner: 90 in (2286 mm) | Flail Tine - Operating: 17’ 8’’ (5.4 m)
Width Swath: 6 ft. (1.83 m)
Windrow Width 3-6 ft. (0.9-1.83 m)
Transport Width 9’ 11” (3.02 m)
Width, Working Position Operating: 14’ 10” (4.52 m)
Transport Length Flail Tine: 18’ 1’’ (5.50 m)
Transport Height 5’ 8” (1.73 m)
Ground Clearance With head fully raised: 17 in (4.32 m)
Dimensions Tilt angle: 2° - 10° | LeaningEdge Flail Conditioner - Diameter: 22 in (560 mm)

Weights

Weight, In Running Order Operating - Flail Tine: 3690 lbs (1674 kg)

Features

Knife Quantity Per disc: 2
Features Cutterbar model: MowMax™ Modular Cutterbar with ShockPRO™ hubs | Number of discs: 7 | Flotation: Up & back, adjustable springs | Flail rotor with 90 tapered flails Side-pull, straight tongue

Product Photography